Once the file has transferred, the router will flash it and reboot automatically.įor a how-to on Windows, have a look at How to upload firmware to a NETGEAR router using TFTP. Be sure the TFTP client is using “binary” mode. img file to the router, either stock firmware or a “factory” OpenWrt binary. Connect to one of the LAN ports and set your PC to a static address in the 192.168.1.X range. In firmware recovery, the router's IP address is 192.168.1.1. (Firmware recovery can also be initiated by typing “fw_recovery” at the bootloader serial console.) ![]() At that point the bootloader is ready for firmware recovery and you can release the reset button. ![]() The power LED will first light steady orange, then flashing orange, and finally flashing green. Firmware recovery mode can be entered by holding down the reset button while turning the power on. The bootloader contains a “firmware recovery” mode where it acts as a TFTP server.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |